01
HSIN6700 Atmospheric Pressure Gauge Verification System
Description:
HSIN6700 atmospheric pressure Calibrator system is a complete verification solution launched by our company for the cumbersome verification of atmospheric pressure gauge in meteorological system. It mainly verifies atmospheric pressure sensor, digital barometer, meteorological pressure transmitter, empty box barometer, etc. It is intelligent, fast, efficient and accurate.
Hardware Feature:
1.The pressure control volume of the system is large, and multiple instruments are detected at the same time.
2.The system supports the expand function. On the original basis, it only needs to add tooling and relevant channels of electrical measurement and acquisition to expand directly.
3.The controller supports the system leakage detection function and can detect the overall leakage rate of the system.
4.The system tooling can be controlled as a whole or in groups.
5.The system operation can be switched automatically and manually.
6.Give the required stable pressure through the pressure control system.
7.Automatic acquisition of data, and real-time monitoring of its accuracy and stability.
8.The full-automatic pressure calibration system is movable as a whole, and all equipment are integrated and installed on the calibration table.
9.Add filtering function at the pressure input and pressure output interfaces to ensure the safe operation of the system.
Software Function:
1.The pressure point is automatically set through the upper computer software to realize full-automatic verification.
2.The test data of pressure sensor can be automatically recorded, processed and stored at the same time.
3.Verification records can be automatically or manually transferred to the server specified by the user.
4.It has a good and concise man-machine operation Chinese interface.
5.Fully meet JJG573-2016 verification regulation of capsule pressure gauge and JJG1084-2013 verification regulation of digital barometer.
1.System accuracy: 0.01% FS, 0.02% FS
2.Pressure control range: 300hpa-1100hpa (can be customized according to requirements)
3.Pressure control stability: control stability < 0.003%
4.Pressure control speed: < 10 seconds
5.Working medium: nitrogen or air pressure control
6.Speed mode: high speed, low speed, settable
7.Communication mode: Ethernet, IEEE-488, usbrs-232,WiFi optional
8.Working voltage: 220VAC ± 10%
9.System size: about 600x600x1600mm
10.System composition: Pressure control system, leak detection system, temperature measurement system, positive pressure system, negative pressure system, calibration software, pressure tooling, etc. all systems can be customized according to user needs.
